Logs are the best way for us to find out what causes your problems with the application. Creating an error message/log varies according to the version of Android:

Devices with Android 4.2 and higher

  • Open the settings of your device and make sure you can access “Developer Options”. In case that you do not see this option in the settings list, please follow the instructions here >>.
  • Repeat the action in Locus that causes the crash
  • Move to the above-mentioned “Developer Options” in the settings of your device
  • Enable USB debugging  
  • Select Take Bug Report

 


  • Wait a few minutes for the report to be created (it may take up to 15 minutes)
  • the log report should appear in your notification bar. From there (or from “Developer options”), you may send it via email to help@locusgis.com or better, upload to a Dropbox/Google Drive and share it with us (reports can be bigger than 15 MB and then they are not correctly attached to email!).

 


Android 7.0+

After tapping “Take bug report” you are offered two types of report - Interactive and Full. Select Interactive.


MIUI ROMs


MIUI 7 and older

  1. install the CatLog application (available on the Google Play for free)

  2. go to Security > Permissions > Root access > Allow root access to CatLog

  3. go on the same way as in case of devices with Android OS older than 4.1

MIUI 8

  1. tap *#*#284#*#* on your phone dial

  2. copy the bugreport from your memory directory sdcard/miui/debug_log

 

General solution for all Android versions

Instructions below are used for creating a detailed log but the procedure is more complicated.

  1. Download ADB installer

  2. Run it

  3. Press Y/Yes to install ADB and Fastboot or N/No to skip

  4. Press Y/Yes to install ADB system-wide or N/No for current user only

  5. Press Y/Yes to install Drivers or N/No to skip

  6. Continue Driver installation

  7. launch the command line WIN+R > CMD > Enter

  8. connect your phone with the PC via USB

  9. repeat the error action

  10. input adb bugreport > c:/Users/myusername/locus_log.txt in the command line

  11. press Enter

  12. wait until the bugreport is done

  13. zip the bugreport (it's huge - over 30 MBs) and send it to help@locusgis.com